Hmmmm


Now, you’ll recall that I used the 3volt FTDI dongle to power the Razor IMU and connect it to the COM port.

Just based on the Razor tutorial there is a straight forward approach to setting up the IMU with a bluetooth connection.  But I had a wild idea.  Using an XBee Explorer Regulated I should be able to pump the IMU data out to a SNAP network.

Of course, I will use the bluetooth approach as well for pumping into Android but the options SNAP provides are wild.

I just need to sort out, in my head, the schematic for the Explorer to see if track cutting and patching is necessary.  The RF266PC1 should power up nicely from the 3.3volts from the Razor.  Might need to jump between pins on the regulator or maybe not. Will see.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: